Conducting Buinsess Overseas

The Legal and Ethical Environment of Business 11/12/12 Phase 5 Individual Project Professor Ivy When conducting business overseas it is important to know the legal regulations (N/A, N/A) which should be considered as the first part of the business plan. One should do their research about how business is handled to avoid illegal activities that one may not be aware of. Some of the regulations are permits, licenses, requirements, documentation, and laws that apply in that country.There are laws for importing merchandise into another country so therefore one must check with someone who specialize in that area of laws. As an importer one must give customs a complete report on the delivery of goods. On December 8, 1993 the Customs Modernization Act was put into place in order to â€Å"shift legal responsibility (N/A, N/A) from Customs to the importer for declaring, among other things, the value, classification, and rate of duty applicable to entered merchandise†. Importers should u se reasonable care when complying with Customs requirements in order to fulfill their duties as importers.As part of Customs they strongly enforce requirements from other agencies which include Environmental Protection Agency, the Drug Enforcement Agency, and the Food and Drug Administration. All of these agencies are included to make sure goods passes safety requirements before any goods are imported into another country. If it is determined that an importer fail to use reasonable care they could face monetary penalties for not following laws. Any company that has large import activity should have satisfactory procedures in place in order to make sure they’re in compliance with Custom laws.Many importers use Customs Broker (N/A, N/A) to handle their files for them. These agencies are licensed by Customs to deal with files for importers. As an importer there is specific documentation requirements needed before any goods can be imported into another country. So therefore, impo rters use Custom Brokers to gather and file all of the necessary documents for importing the goods. Importers are still responsible for following all rules under the Mod Act. If these laws are broken they can be held liable for criminal or civil penalties under the Mod Act.Criminal Penalties can be defined as anyone who gives false information to Customs officers. Anyone who is in violation of this statue could face two years imprisonment, fines, or possible both for all violation that were related to importation. Civil penalties can be defined as anyone who provide fraud through the use of gross negligence or transmit false data which relates to any fraudulent activities. As part of Customs authority they can seize merchandise to get payment for the violation. As part of doing business oversees one will deal with exporters.Exporter duties (N/A, N/A) include making sure that it is legal to export merchandise from United States to another country. They are also responsible to make su re that all required documentation are in order and filed to proper agency. Before exporting any product one should be sure to check for licenses and other documentation needed to export products. There are certain laws that apply to exporters which include laws such as anti-boycott laws, the Export Administration Regulations, and Economic sanctions.When determining whether or not a license is needed for export the appropriate authority checks for the product’s classification, end-user, and end-use. It is also important that one should know about Free Trade Agreements. Free Trade Agreements (N/A, 2010) is known to be one of the best opportunities to expand the foreign market to the United States. Part of the Free Trade Agreement is to reduce barriers to United States exports which protect the United States interests. This law makes it easier and less expensive for U. S. ompanies to export their goods to trading market partners. So therefore, we could use this to our advantage as a company to export goods to from and to other countries. The ethical code of conduct (N/A, Sigue Corp. , 2012) for employees and vendors is to ensure strong ethical principles govern prevent conflicts that might occur between the employees and vendors. All employees and vendors must abide by the company’s ethical code of conduct. In order for the code of conduct to be enforced each employee or vendor must report any conflicts that relates to the company’s welfare.As part of the company’s policy we are responsible for keeping customers, employees, and vendors satisfied with the services provided from this company. So therefore, we required our employees to maintain a high level professional standard while conducting business in our company. Employees should keep all information confidential about Company, customers, employees, agents, and vendors. If any employee has an issue we encourage them to consult with someone such supervisor, management, or anyone el se in a higher position about any problems they may encounter.If employees or vendor are found to be in violation of Code of conduct will be investigated and immediately terminated. As part of the Company’s policies we report any unlawful behavior to the appropriate agency. This company doesn’t tolerate fraudulent behavior, dishonest, theft, embezzlement, threats, or any other inappropriate behavior. Legal and ethical guidelines (Phillips, 2012) are important in all businesses because they are part of laws that shall be followed. All businesses should have ethical guidelines that they should abide by in order to maintain laws which are enforceable by the state and government.If a business fails to follow guidelines and laws they could be punish or penalized by local laws that weren’t followed. Ethical guidelines is used to protect employees from being unpaid by enforcing laws for wages and hours worked. These laws are put in place to avoid businesses from not tr eating employees fairly such as not paying them for the hours worked or overtime. When distinguishing between right and wrong in business dealings (Merchant, 2006-2012) one must consider is the action true and how it will affect the business.They should also take into consideration whether or not the decision is fair to all parties involved. Another question one should ask is will the decision benefit the outcome of people that have invested in this dealing. After thinking about the outcome of all decision it is important that you chose the action that is legal in order to avoid illegal behavior that will lead to punishment of some type. The punishment could result in termination, fines, or imprisonment depending on what type of wrong doings one has committed.So therefore, when hiring employees one should make sure they are capable of making the right decision that will have a positive outcome for the company. As part of ethical conduct one must be capable of deciding what is right and what is wrong in order to have a good foundation in ethics. Making the right choices in a company could result in the company being successful and kept out of the public eye for unethical behavior. This type of behavior has prompted such an increase in these types of legal and ethical violations (Richard Mauer & Anna M. Tinsley, 2010) because they aren’t being handled appropriate.Many companies aren’t punished to the full extent because they have power and money to get them out of that situation. When other companies see that another company has gotten away breaking the law they think that they can away with it too. Ethical violations are increasing because many companies forget about them and want to get the job done in a short time with a low cost. Many companies in today’s society don’t have morals and good values so this makes it difficult to practice ethical guidelines for companies. If all companies enforced good ethical behavioral some of the u nethical violation could be reduced.This could lead to a more successful reliable business that more people will feel comfortable with. My opinion regarding the impact of the ethical implications (N/A, 2005-2012) and violations on the business itself from the perspective of the consumer is that this company follows rules and regulation to avoid illegal behavior. Some companies seem to think that they can get away with doing things that are not legal and that they won’t be caught. If the court keeps ordering them to pay fines and put them on probation they may not recognize what the consequences are.So I think they should lose money in order to realize that this type of behavior is unacceptable. So therefore, the company should be shut down until everything is corrected. I feel by them paying isn’t enough because they have billions of dollars and money isn’t a problem. Investors may feel that this company is reliable for their actions and may not want to do busin ess with them. The reason why investors may not want to do business with them is because they have a history of illegal and unethical behavior that may cause investors to lose money.

Lexical Stylistic Devices

LEXICAL STYLISTIC DEVICES Metaphor Genuine metaphors Trite(dead) metaphors Metonymy Metonymy Metonymy is the substitution of one word for another with which it is associated: ‘The White House said†¦Ã¢â‚¬â„¢ (the American government) ; the press (newspapers and magazines); the cradle(infancy, place of origin);the grave(death); The hall applauded; The marble spoke; The kettle is boiling; I am fond of Agatha Christie; We didn’t speak because there were ears all around us; He was about a sentence away from needing plastic surgery . Synecdoche SimileShe passed through the grove like a shadow, and like a shadow she sailed across the garden. Cliche I want to die young at a ripe old age. Irony Irony Well done! A fine friend you are! ‘What a noble illustration of the tender laws of this favoured country! – they let the poor go to sleep! ’                Irony must not be confused with humour, although they have very much in common. Humour always causes laughter. But the function of irony is not to produce a humorous effect. Irony is generally used to convey a negative feeling: irritation, displeasure, pity or regret. EpithetEpithet coveys the subjective attitude of the writer as it is used to characterize an object and pointing out to the reader some properties or features of the object. Epithet aims at evaluation of these properties or features. Heart-burning smile; wild winds; fantastic terrors; voiceless sands;                unearthly beauty; deep feelings; sleepless bay. Fixed epithets (stock images) are mostly used in ballads and folk-songs: ‘true love’, ‘dark forest’, ‘sweet Sir’, green wood’; ‘good ship’, ‘brave cavaliers’. From the point of view of their compositional structure epithets may be divided into simple, compound, phrase and sentence epithets.Simple: dreary midnight; brilliant answer; sweet smile. Compound: heart-braking si gh; good-for-nothing fellow; Phrase epithets and sentence epithets: 1. ‘Personally I detest her (Giaconda’s) smug, mystery-making, come-hither-but-go-away-again-because-butter-wouldn’t-melt-in-my-mouth expression’. 2. There is a sort of ‘Oh–what–a-wicked-world-this-is-and-how-I-wish-I-could-do-something-to-make-it-better-and-nobler’ expression about Montmorency that has been known to bring to tea s into the eyes of pious old ladies and gentlemen.The reversed epithets, or metaphorical, are of two types: 1) two nouns are linked in an of-phrase: a devil of a job; ‘A little Flying Dutchman of a cab’2) The predicative is in the inverted position: ‘Fools that they are’; ‘Wicked as he is’                Transferred epithets describe the state of a human being but referred to an animate object: sleepless pillow; unbreakfasted morning; merry hours; an indifferent shoulder; sick chambers. Ox ymoron Oxymoron is a combination of two words in which their meaning clash, being opposite in sense:                Sweet sorrow; pleasantly ugly face; deafening silence; horribly beautiful.The following example describes the author’s attitude to New York: ‘I despise its vastness and power. It has the poorest millionaires, the littlest great men, the plainest beauties, the lowest skyscrapers of any town I ever saw. (Satiric mocking) Allusion Allusion is reference to a famous historical, literary, mythological, biblical or everyday life character or event, commonly known. As a rule no indication of the source is given. It’s his Achilles heel. Antonomasia Antonomasia is intended to point out the leading, most characteristic features of a person or of event.It categorizes the person and simultaneously indicates both the general and the particular. Antonomasia can be defined as a variety of allusion:                Vralman, Molchalin, Mr. Zero, Do n Juan. Metalepsis Metalepsis is a reference to something remotely associated with the theme of the speech. ‘I’ve got to go catch the worm tomorrow morning. ’ said Mary. (The early bird catches the worm- a proverb) Zeugma Zeugma (syllepsis) is the use of a word in the same grammatical but different semantic relations. It creates a semantic incongruity which is often humorous: 1.He lost his hat and his temper. 2. ‘†¦and covered themselves with dust and glory. -Mark Twain 3. Oae ai? au e aaa nooaaioa. Iaei a aaeioao, a? oaie – a oieaa? neoao. 4. The alphabet was above the blackboard and friendly atmosphere was there. 5. ‘And May’s mother always stood on her gentility; and Dora’s mother never stood on anything but her active feet’. Pun Pun (also known as paronomasia) is a deliberate confusion of similar – sounding words for humorous effect. Puns are often used in jokes and riddles. E. g. 1. What is the difference b etween a schoolmaster and an engine-driver? One trains the mind and the other minds the train. ) 2. The name Justin Time sounds like ‘just in time’ 3. I have no idea how worms reproduce but you often find them in pairs (pears). 4. Officer. -What steps (measures) would you take if an enemy tank were coming towards you? Soldier. – Long ones. Interjections and Exclamatory Words Interjections and Exclamatory Words are used to express our strong feelings; they are conventional symbols of human emotions. The interjection is not a sentence; it is a word with strong emotive meaning. Interjections radiate the emotional element over the whole utterance.Here are some of the meanings that can be expressed by interjections: joy, delight, admiration, approval, disbelief, astonishment, fright, regret, dissatisfaction, boredom, sadness, blame, reproach, protest, horror, irony, sarcasm, self-assurance, despair, disgust, surprise, sorrow, and many others. Oh! Ah! Pooh! Gosh! Alas! Heavens! Dear me! God! Come on! Look here! By the Lord! Bless me! Humbug! Terrible! Awful! Great! Wonderful! Fine! Man! Boy! Why! Well! Periphrasis Periphrasis denotes the use of a longer phrasing in place of a possible shorter and planer form of expression.It is also called circumlocution due to the round-about or indirect way to name a familiar object. There are traditional periphrases which are not stylistic devices, they are synonymic expressions: The giver of rings, the victor lord, the leader of hosts (king), the play of swords(battle), a shield-bearer(warrior), the cap and gown (student), the fair sex (women), my better half (my wife). The traditional periphrasis is an important feature of epic poetry. Periphrasis as stylistic device is a new, genuine nomination of an object. Stylistic periphrasis can be divided into logical and figurative. Logical: instruments of destruction (pistols), he most pardonable of human weaknesses (love). Figurative periphrasis is based either on metaphor or on metonymy. To tie the knot (to marry), the punctual servant of all work (the sun). There is little difference between metaphor or metonymy and periphrasis. Euphemisms Euphemism is a word or a phrase used to replace an unpleasant word or expression: to die=to pass away, to be no more, to depart, to join the majority, to be gone; to kick the bucket, to give up the ghost, to go west. So, euphemisms are synonyms which aim to produce a mild effect. Euphemisms may be divided into several groups:                1) religious, 2) oral, 3) medical, 4) parliamentary. a woman of a certain type(whore), to glow(to sweat),mental hospital(madhouse), the big C(cancer), sanitation worker(garbage man). Meiosis/Understatement Meiosis/Understatement is a figure of speech which intentionally understates something or implies that it is less in significance, size, than it really is. For example, a lawyer defending a schoolboy who set fire to school, might call the fact of arson a â €˜prank’ (i? iaaeea). Hyperbole Hyperbole is a deliberate overstatement or exaggeration of a phenomenon or an object. He was so tall that I could not see his face. Proverbs and SayingsProverbs and sayings are brief statements showing in condensed form life experience of the community and serving as conventional symbols for abstract ideas. They are usually didactic and image rearing. Proverbs and sayings have some typical features: rhythm, sometimes rhyme and or alliteration. 1. ‘Early to bed and early to rise, 2. Out of sight, out of mind. Iineiaeou iaeaaa? o aoeaaeuiui e/eee ia? aiiniui niuneii. Aeaia ioeoa ii iieaoo. Iiaiai? ee eia? o oieuei aoeaaeuiue ieai. Ai? y aiyouny- n? anouy ia aeaaou. Epigrams Epigrams are terse, witty statements, showing the turn of mind of the originator.Epigram is a stylistic device akin to a proverb, the only difference being that epigrams are coined by people whose names we know, while proverbs are the coinage of the people. ‘A G od that can be understood is not a God. ’ Quotations Quotation is a repetition of a phrase or statement from a book, speech and the like used by the way of illustration, proof or as a basis for further speculation on the matter. By repeating the utterance in a new environment, we attach to the utterance an importance. Allegory Allegory is a device by which the names of objects or characters are used figuratively, representing some more general things, good or bad ualities. A type of allegory is Personification. Personification Personification is a form of comparison in which human characteristics, such as emotions, personality, behaviuor and so on, are attributed to an animal, object or idea. The proud lion surveyed his kingdom. The primary function of personification is to make abstract ideas clearer to the reader by comparing them to everyday human experience. How soon hath Time, the subtle thief of youth,                Stolen on his wing my three and twentieth y ear! Personification is often represented by the masculine or feminine pronouns for the names of animals, objects or forces of nature.He is used for the Sun, the Wind , for the names of animals (The Cat that walked all by himself), for abstract notions associated with strength and fierceness-Death, Fear, War, Love. She is used for what is regarded as rather gentle (the Moon, Nature, Beauty, Hope, Mercy. In neutral style there also some associations of certain nouns and gender. The names of countries, if the country is not considered as a mere geographical territory, are referred to as feminine (England is proud of her poets). The names of vessels and vehicles are also referred as feminine.Anthropomorphism Anthropomorphism is the form of personification consisting of creating imagery persons of inanimate objects. Common examples include naming one’s car or begging a machine to work. The use of anthropomorphized animals has a long tradition in literature and art. They are used to portray stereotypical characters, in order to quickly convey the characteristics the author intends them to possess. Examples include Aesop’s fables, famous television characters, Tom and Jerry, Mickey Mouse and a lot of other funny animals. Lexical Stylistic Devices LEXICAL STYLISTIC DEVICES Metaphor Genuine metaphors Trite(dead) metaphors Metonymy Metonymy Metonymy is the substitution of one word for another with which it is associated: ‘The White House said†¦Ã¢â‚¬â„¢ (the American government) ; the press (newspapers and magazines); the cradle(infancy, place of origin);the grave(death); The hall applauded; The marble spoke; The kettle is boiling; I am fond of Agatha Christie; We didn’t speak because there were ears all around us; He was about a sentence away from needing plastic surgery . Synecdoche SimileShe passed through the grove like a shadow, and like a shadow she sailed across the garden. Cliche I want to die young at a ripe old age. Irony Irony Well done! A fine friend you are! ‘What a noble illustration of the tender laws of this favoured country! – they let the poor go to sleep! ’                Irony must not be confused with humour, although they have very much in common. Humour always causes laughter. But the function of irony is not to produce a humorous effect. Irony is generally used to convey a negative feeling: irritation, displeasure, pity or regret. EpithetEpithet coveys the subjective attitude of the writer as it is used to characterize an object and pointing out to the reader some properties or features of the object. Epithet aims at evaluation of these properties or features. Heart-burning smile; wild winds; fantastic terrors; voiceless sands;                unearthly beauty; deep feelings; sleepless bay. Fixed epithets (stock images) are mostly used in ballads and folk-songs: ‘true love’, ‘dark forest’, ‘sweet Sir’, green wood’; ‘good ship’, ‘brave cavaliers’. From the point of view of their compositional structure epithets may be divided into simple, compound, phrase and sentence epithets.Simple: dreary midnight; brilliant answer; sweet smile. Compound: heart-braking si gh; good-for-nothing fellow; Phrase epithets and sentence epithets: 1. ‘Personally I detest her (Giaconda’s) smug, mystery-making, come-hither-but-go-away-again-because-butter-wouldn’t-melt-in-my-mouth expression’. 2. There is a sort of ‘Oh–what–a-wicked-world-this-is-and-how-I-wish-I-could-do-something-to-make-it-better-and-nobler’ expression about Montmorency that has been known to bring to tea s into the eyes of pious old ladies and gentlemen.The reversed epithets, or metaphorical, are of two types: 1) two nouns are linked in an of-phrase: a devil of a job; ‘A little Flying Dutchman of a cab’2) The predicative is in the inverted position: ‘Fools that they are’; ‘Wicked as he is’                Transferred epithets describe the state of a human being but referred to an animate object: sleepless pillow; unbreakfasted morning; merry hours; an indifferent shoulder; sick chambers. Ox ymoron Oxymoron is a combination of two words in which their meaning clash, being opposite in sense:                Sweet sorrow; pleasantly ugly face; deafening silence; horribly beautiful.The following example describes the author’s attitude to New York: ‘I despise its vastness and power. It has the poorest millionaires, the littlest great men, the plainest beauties, the lowest skyscrapers of any town I ever saw. (Satiric mocking) Allusion Allusion is reference to a famous historical, literary, mythological, biblical or everyday life character or event, commonly known. As a rule no indication of the source is given. It’s his Achilles heel. Antonomasia Antonomasia is intended to point out the leading, most characteristic features of a person or of event.It categorizes the person and simultaneously indicates both the general and the particular. Antonomasia can be defined as a variety of allusion:                Vralman, Molchalin, Mr. Zero, Do n Juan. Metalepsis Metalepsis is a reference to something remotely associated with the theme of the speech. ‘I’ve got to go catch the worm tomorrow morning. ’ said Mary. (The early bird catches the worm- a proverb) Zeugma Zeugma (syllepsis) is the use of a word in the same grammatical but different semantic relations. It creates a semantic incongruity which is often humorous: 1.He lost his hat and his temper. 2. ‘†¦and covered themselves with dust and glory. -Mark Twain 3. Oae ai? au e aaa nooaaioa. Iaei a aaeioao, a? oaie – a oieaa? neoao. 4. The alphabet was above the blackboard and friendly atmosphere was there. 5. ‘And May’s mother always stood on her gentility; and Dora’s mother never stood on anything but her active feet’. Pun Pun (also known as paronomasia) is a deliberate confusion of similar – sounding words for humorous effect. Puns are often used in jokes and riddles. E. g. 1. What is the difference b etween a schoolmaster and an engine-driver? One trains the mind and the other minds the train. ) 2. The name Justin Time sounds like ‘just in time’ 3. I have no idea how worms reproduce but you often find them in pairs (pears). 4. Officer. -What steps (measures) would you take if an enemy tank were coming towards you? Soldier. – Long ones. Interjections and Exclamatory Words Interjections and Exclamatory Words are used to express our strong feelings; they are conventional symbols of human emotions. The interjection is not a sentence; it is a word with strong emotive meaning. Interjections radiate the emotional element over the whole utterance.Here are some of the meanings that can be expressed by interjections: joy, delight, admiration, approval, disbelief, astonishment, fright, regret, dissatisfaction, boredom, sadness, blame, reproach, protest, horror, irony, sarcasm, self-assurance, despair, disgust, surprise, sorrow, and many others. Oh! Ah! Pooh! Gosh! Alas! Heavens! Dear me! God! Come on! Look here! By the Lord! Bless me! Humbug! Terrible! Awful! Great! Wonderful! Fine! Man! Boy! Why! Well! Periphrasis Periphrasis denotes the use of a longer phrasing in place of a possible shorter and planer form of expression.It is also called circumlocution due to the round-about or indirect way to name a familiar object. There are traditional periphrases which are not stylistic devices, they are synonymic expressions: The giver of rings, the victor lord, the leader of hosts (king), the play of swords(battle), a shield-bearer(warrior), the cap and gown (student), the fair sex (women), my better half (my wife). The traditional periphrasis is an important feature of epic poetry. Periphrasis as stylistic device is a new, genuine nomination of an object. Stylistic periphrasis can be divided into logical and figurative. Logical: instruments of destruction (pistols), he most pardonable of human weaknesses (love). Figurative periphrasis is based either on metaphor or on metonymy. To tie the knot (to marry), the punctual servant of all work (the sun). There is little difference between metaphor or metonymy and periphrasis. Euphemisms Euphemism is a word or a phrase used to replace an unpleasant word or expression: to die=to pass away, to be no more, to depart, to join the majority, to be gone; to kick the bucket, to give up the ghost, to go west. So, euphemisms are synonyms which aim to produce a mild effect. Euphemisms may be divided into several groups:                1) religious, 2) oral, 3) medical, 4) parliamentary. a woman of a certain type(whore), to glow(to sweat),mental hospital(madhouse), the big C(cancer), sanitation worker(garbage man). Meiosis/Understatement Meiosis/Understatement is a figure of speech which intentionally understates something or implies that it is less in significance, size, than it really is. For example, a lawyer defending a schoolboy who set fire to school, might call the fact of arson a â €˜prank’ (i? iaaeea). Hyperbole Hyperbole is a deliberate overstatement or exaggeration of a phenomenon or an object. He was so tall that I could not see his face. Proverbs and SayingsProverbs and sayings are brief statements showing in condensed form life experience of the community and serving as conventional symbols for abstract ideas. They are usually didactic and image rearing. Proverbs and sayings have some typical features: rhythm, sometimes rhyme and or alliteration. 1. ‘Early to bed and early to rise, 2. Out of sight, out of mind. Iineiaeou iaeaaa? o aoeaaeuiui e/eee ia? aiiniui niuneii. Aeaia ioeoa ii iieaoo. Iiaiai? ee eia? o oieuei aoeaaeuiue ieai. Ai? y aiyouny- n? anouy ia aeaaou. Epigrams Epigrams are terse, witty statements, showing the turn of mind of the originator.Epigram is a stylistic device akin to a proverb, the only difference being that epigrams are coined by people whose names we know, while proverbs are the coinage of the people. ‘A G od that can be understood is not a God. ’ Quotations Quotation is a repetition of a phrase or statement from a book, speech and the like used by the way of illustration, proof or as a basis for further speculation on the matter. By repeating the utterance in a new environment, we attach to the utterance an importance. Allegory Allegory is a device by which the names of objects or characters are used figuratively, representing some more general things, good or bad ualities. A type of allegory is Personification. Personification Personification is a form of comparison in which human characteristics, such as emotions, personality, behaviuor and so on, are attributed to an animal, object or idea. The proud lion surveyed his kingdom. The primary function of personification is to make abstract ideas clearer to the reader by comparing them to everyday human experience. How soon hath Time, the subtle thief of youth,                Stolen on his wing my three and twentieth y ear! Personification is often represented by the masculine or feminine pronouns for the names of animals, objects or forces of nature.He is used for the Sun, the Wind , for the names of animals (The Cat that walked all by himself), for abstract notions associated with strength and fierceness-Death, Fear, War, Love. She is used for what is regarded as rather gentle (the Moon, Nature, Beauty, Hope, Mercy. In neutral style there also some associations of certain nouns and gender. The names of countries, if the country is not considered as a mere geographical territory, are referred to as feminine (England is proud of her poets). The names of vessels and vehicles are also referred as feminine.Anthropomorphism Anthropomorphism is the form of personification consisting of creating imagery persons of inanimate objects. Common examples include naming one’s car or begging a machine to work. The use of anthropomorphized animals has a long tradition in literature and art. They are used to portray stereotypical characters, in order to quickly convey the characteristics the author intends them to possess. Examples include Aesop’s fables, famous television characters, Tom and Jerry, Mickey Mouse and a lot of other funny animals.

Hot Asphalt Mix Lab Report Example | Topics and Well Written Essays - 750 words

Hot Asphalt Mix - Lab Report Example   This implies that the cohesive forces between the mixture particles are at their minimal. This is considering that in cohesive materials; the cohesive forces reduce with the increase in the moisture volume. At high temperatures, the viscosity of the asphalt reduces making it be more of a liquid. This permits the particles of the aggregate to interlock in an effective way. At a slightly lower temperature, the binder will act as a lubricant allowing the aggregate of the asphalt to undergo densification and shift in the process of compaction. Further temperature reduction leads to a binder stiffening in which case its cohesion avoids any more densification. From the results, it is clear that as the content of asphalt increase, the asphalt thickness of the aggregate also increases. At the temperatures set for compaction, the thickened films make the effect of lubrication to be experienced more. The mixture temperature has an effect on the process of compaction in a similar way the content of asphalt does. However, there is a limit to the temperature which is 150 degrees. Above this temperature will lead to asphalt damage through hardening being accelerated. On the other hand, there is also a lower temperature limit which is approximately 85 degrees; any temperature below this means that there is need of compaction effect on the content of void. Asphalt mix in most cases has many volumetric properties which are constituent of few properties in the volume like voids in the aggregate of the mineral, void in asphalt, void in the total mix. The crucial void in the air is directly related to the density (Marker, 284). The results showed the air void to range from 2.618 to 8.631 and the average is 4.613%. The average gives a perfect figure for the mixtures that are dense-graded.  Ã‚  

B. Activity Essay Example | Topics and Well Written Essays - 250 words

B. Activity - Essay Example This way, I would be able to figure out how different Nora is compared to the rest of her classmates in terms of the level of creativity, resourcefulness, and especially the manner by which she expresses herself as well as the content of all her responses. Her degree of responsiveness on certain issues discussed would aid me in detecting an aspect of her conflict. Moreover, I would continue to keep in touch with Nora’s friend in private for updates and probably ask how Nora is coping with her concerns at home or any parts of the community beyond school. I think it might help to advise Nora’s friend to stay by her side during the moments she appears disturbed or bothered to see how his or her comforting presence may prevent any tendencies of self-infliction by Nora. If I can get her to open up to me what the real problem is behind her cutting of wrist in this process, my role as a teacher I suppose could go as far as communicating with her parents, yet only at the hint of her consent or whenever she feels ready. Meanwhile, I ought to proceed teaching the class, of which Nora is part, the essence not merely of academic endeavor but even the values associated with overcoming life’s

Global Climatic Change Essay Example | Topics and Well Written Essays - 1500 words

Global Climatic Change - Essay Example The countries were primarily divided into two main categories according to their economic prosperity: the developed and the developing countries. The level of influence created by these countries was estimated and was concluded that developed countries are mainly responsible for harmful emissions. The high ranked developed countries were asserted to take the lead in combating climate change as they are equipped with the necessary resources and the best possible practices to combat the global threat. The first priority of developed countries is to explore the best practices to have a check on the emission levels from their industry sectors which contribute to the global warming. The awareness levels have to create in the developed countries to educate the industry lot about the ill affects of the global warming. The future industrial growth has to be susta1inable in empowering the human kind in a better mode of safety practices. The UN has concluded that the system that has caused the ill effect of global warming has to be cautioned to make them reciprocate to sooth the ill effects. The members of the UN have arrived at a point that the global cause cannot be perceived literally in the same mode for every other country and region. The countries have a very unique identity regarding the climate, the living standard, the industrialization standards, the ecosystems, the yearly climatic changes, the emission levels of various harmful gases into the environment, the climatic absorption levels of the gases at different region have to taken under consideration. After looking at all the issues and concerns the UN has arrived at phrase "common but differentiated responsibilities" as per the future ultimate challenge. The cause is global warming and the effect is on the entire globe fraternity. The inner sense of the phrase is that the respective countries have to react according to their indigenous issues and the contributions levels to the global warming. The responsibilities levels will change according to the contribution levels. The level of focus has to be amended according the requirement at the region. The issues and concerns with respect to the countries are to be tuned up to the global cause of the warming. The countries which agree with the treaty have signed on a universal oath document to abide the responsibilities. The countries were given the authority to handle the native concerns in view with the UN policy frame work. More than half of the countries has signed the agreement to contribute to the global cause and was opened for more countries to join. The main significant points asserted in the accord are: Acknowledging2 the reason and educating about the major areas which would effect by climate change. The countries declare that it is a major issue that would the prosperity of their region. Creating a sense of concern on every system involved in contributing to warming. Different countries irrespective of their pollution contribution should be aware that the neighboring countries industrialization would certainly carry to their expanse. Concerned that human quest for robust environment has enables many allied adversities along with the comfort that would effect in a long run questioning the identity of human existence. The countries are now concerned about the kind of human products and services contributing to the global

Discussion Paper - Green Meetings Task Force Report Essay

Discussion Paper - Green Meetings Task Force Report - Essay Example Every sector of the event industry, is supposed to develop comprehensive environmental policies coupled with a strategy, in order to implement the environmental policy. There should also be constant communication between the management staff and auxiliary staff, regarding the stipulations of the environmental policy. Additional minimum measures include- recycling used products, purchasing environmental friendly products, performing routine maintenance checks on emissions, creating energy management programs to reduce energy consumption and generally avoiding wasting resources. Some suggestions put forward by the Council are easy to implement, such as- ensuring that all employees are properly informed regarding the measures of environmental sustainability, recycling and using biodegradable products. However, some of the measures are very difficult to implement. Such measures include- curbing the emissions of vehicles and using alternative fuel vehicles. The measures needed to be implemented, to create a sustainable environment, are very costly. The measures require a lot of capital to be implemented. Additionally, the measures require enormous support from the government. However, there is no political will from the government. These are some of the obstacles that may limit the implementation of the measures. The issue of environmental sustainability has been a hot topic globally. Therefore, I wish to ask a few questions regarding its possibility- Are the minimum measures adopted adequate? Have we reached a point of no return regarding

Knowledge Economy Essay Example | Topics and Well Written Essays - 1000 words

Knowledge Economy - Essay Example A knowledge economy can exhibit itself in the interconnections between science and technology; the emphasis on creativity as critical to economic growth and competitiveness; the increasing focus on education and life-long learning; and the orientation toward investments in intangible goods and services, such as R&D, rather than fixed capital; and the rapid adoption of information and communication technology (ICT) that is providing nations greater independence as well as greater connectiveness (Archibugi & Pietrobelli, 2003). However, some contend that the expansion of knowledge economies within developing nations can also bring with it negative consequences, such as increasing the divide between developed an developing nations, and crowding in their economic development (Casanueva, 2001; Pietrobelli, 2000). This paper aims to present the argument that a knowledge economy within a developing nation can contribute to numerous negative effects on a countries economic and social development. Firstly, the positive arguments that promote the adoption of a knowledge economy by developing nations shall be presented. Secondly, the contrasting negative impact consequences to the adoption of KE shall be provided. Finally, a conclusion shall synthesise the main points of the paper and make recommendations for future research.It is generally conceded that a knowledge economy can positively contribute to the development of a nation's economic and social institutions by way of facilitating more effective goods and services production and delivery, lowering costs to public citizens (Archibugi & Pietrobelli, 2003). As such, developing nations are encouraged to adopt a knowledge economy as an efficient method for improving their competitiveness on the global marketplace, as well as alleviating their wel fare needs. In order to effectively incorporate a knowledge economy it is necessary for developing nations to capitalize on their economic and social strengths, and also to plan appropriately on how to invest in human capital, social institutions, technology and innovative and competitive businesses (Kuznetzov & Sabel, 2003). Countries such as Chile, Ireland, Malaysia and Korea are portrayed as success stories of countries, which have incorporated a knowledge economy into their social and political value systems (Kuzetzov & Sabel, 2003). Increasingly, science-based products and services are being incorporated into world trade, foreign direct investment (FDI) of multinational corporations to facilitate innovation globally, and cooperation across the boarders of scientific and technological research and development (Narula & Sadowski, 2002). Less developed countries are able to benefit from the increasing flow of knowledge if they are able to implement active policies that focus on enhancing learning opportunities and improving access to new knowledge and technology (Archibugi & Pietrobelli, 2003). Additionally, the opportunity to participate in the 'brain circulation' of open migration of people and their knowledge across boarders provides job prospects and educational experiences that prepare the LDC citizen to participate in a global workforce (Kuznetsov & Sabel, 2003).Additionally, a study investigating indicators that represent knowledge within 92 nations, during the period

Human Development In The Glass Menagerie By Tennessee Williams Essay

Human Development In The Glass Menagerie By Tennessee Williams - Essay Example The play tries to justify that complete and happy families should have the support of the male’s household heads. Amanda’s family has no father as he abandoned them. They try to find the happiness they do not have and end up living in fear and neglects. Therefore, Tom takes the responsibility to take care of the family despite his small age. The new roles affect his psychological development. Tom’s parental duties at a tender age deprive him of his prime youth experience. Human development is a process, and everyone should enjoy every stage of his or her life thus, psychological mismatch evidence in Tom’s boredom in family issues. Glass Menagerie emphasizes roles of parents in child development. However, the play illustrates strictness and decision making on behalf of kids as positive attributes of a good mother. Amanda is strict on Tom and Laura. She expresses her desire for Laura to have a right date and asks for Tom’s assistance but quickly becomes angry that she dropped out of typing class because of shyness. In psychological perspectives, parents should understand the strengths and weaknesses of their children and help them to overcome the challenges. Amanda’s approach is worse and only serves to humiliate Laura. She also offers little assistance to enable Laura to overcome shyness. Amanda is a character who does not tolerate mistakes among her children. Thus, she engages in every aspect of their lives with the notion of providing the moral support. Nonetheless, she portrays qualities of a mother who is overprotective. Her approach is not a healthy approach to parenting because she provides little time for the Tom and Laura to explore the world and establish their desires. Her actions are evident when she asks Tom to introduce Laura to a friend. Jim disappoints Laura making Amanda yell at Tom. She is the cause of her daughter’s heartbreak, and reason Tom left their home (Bloom 72).

Short Response # 4 Essay Example | Topics and Well Written Essays - 500 words

Short Response # 4 - Essay Example When he met Gina Desander, a mature, independent woman in her thirties, everything changed. Gina saw in him a potentially vibrant and handsome young man. In the short time they spent together Gina taught Trip everything he needed to know about women and about his own virility. The "mantle of a lover" has been conveyed on to Trip. (71) He has begun his journey as a great lover, drawing women to his person as if he were a magnet. After his trysts with Gina, Trip changed from the person his friends once knew. He seemed to have transformed from a chubby boy to a muscular and striking young man. Trip has now changed his manner of dress. He deviated from "school boy shirts and pants" to "western outfits" which resembled the outfits worn by admirers of Gina, his first love. His voice deepened both owing to his physical development and the confidence that comes from being loved and initiated by an adept older woman. His scent also changed from a boyish freshness to the musky scent of a confident young man who knows what he wants and how to get it. Eugenides alluded to the fact that Trip was a responsible A student before his Gina experience.

Healthy Lifestyle Essay Example for Free

Healthy Lifestyle Essay The Role and Issues that arise of the GetFitCrossFit Organization among adults in Brunei. Health, a fortune I wish upon every woman or man I see for without it she or he will not be able to explore the seas. Although the ideal concept would be for everyone to live a healthy lifestyle, the world is evident that this is difficult to achieve. The leading causes of worldwide deaths are diseases which I believe can be prevented (Grifantini, 2010). Simply, health is a necessary commodity to carry out everyday tasks, and if one would like to carry out a task well, one needs to have a healthy mind, body and soul (World Health Organization, 1948). In Brunei, in the recent years, the government keeps campaigning for healthy lifestyles, banks and other companies hold marathons, GetFitCrossFit organization has been rising and is very popular now. However, although these efforts have its role and aim on maintaining and achieving a healthy lifestyle, it may not be affective. Hence, this essay will elaborate on the role and the effectiveness on the GetFitCrossFit organization among adults in Brunei. First and foremost, it is the members’ responsibility to understand the elements of fitness, examine their present fitness status, decide to begin or continue suitable exercise habits and lastly to determine their health behaviors that need to be changed following appropriate steps (Howley Franks, 1991, p.10). The role of this organization is basically to keep fit and practice a healthy lifestyle. Adding to that, their aim is to make people fast and strong. This organization concentrates on mainly on three fundamental factors that must collaborate in order to benefit from workouts which are exercise, nutrition and recovery. Weightlifting, gymnastics and running are the components used for the exercise in balancing strength an d conditioning. Balanced diet is really important in terms of reducing processed food and sugar and more natural foods (Rodriguez, 2009). As for the recovery, proper sleeping habits are needed, stretching and make the soft tissues work by massage therapy. The GetFitCrossFit organization is organized and thorough with what they do. Members will have a full fitness assessment before starting because each individual will have a safely designed workout done by the committee. Not only will the members be coached during the workout but also in and out of the gym. Everyone in this organization motivates one another and improves by working hard, having determination and a persevering attitude. This organization’s slogan is  Forging Elite Fitness (GetFitCrossFit, 2012). An individual that enters this organization has definitely made a crucial move towards improving or maintaining their present fitness level but there are issues that may arise among adults in Brunei (Howley Franks, 1991, p.10). Firstly, setting goals is important so that there is an aim to strive. If there are no goals, there is no motivation and a clear plan. This will lead to not being able to see any results from start although GetFitCrossFit assist one person in making healthy changes; one person still have to decide on what changes to make. Secondly, some people are afraid of pain, injury and torture that they might encounter hence not wanting to join this organization. Some people may go for the first time and after finding out what it is all about, they give up as they do not have the mindset of putting in efforts to be fit and healthy. Thirdly, GetFitCrossFit has a fixed time resulting in the main biggest reason to not join or stop this organization is that they have no time. This shows that prioritizing is really poor among adults in Brunei. Fourthly, some people are afraid of their reputation. They may be embarrassed on their appearance, the mistakes they may make, having weak health and poor stam ina (Why people stop exercising, 2012). Letting go of bad habits such as reductions in smoking, alcoholic drinking, weight, eating unhealthy food and stress are also the major issues (Howley Franks, 1991, p.211). Lastly, this is rare but some people can’t afford the membership payment which costs hundred dollars per month. Moving on will be the effectiveness of this organization. GetFitCrossFit organization meets every day except on Sundays after 6pm onwards and in the mornings on Saturday. Amazingly, every Tuesday, the GetFitCrossFit outdoor session is held at the University of Brunei Darussalam. The rest of the days, it is held at their gym which is called the box (GetFitCrossFit, 2010). This organization has a blog which will be updated daily to guide their members before the actual workouts in the evenings occur. According to Tobey (1920, p.649), Emerson once stated â€Å"The first wealth is health.† Therefore the members in this organization do not take this as an expense but instead a necessity and money well spent. They see this as an activity of making new friends and having fun as well as getting or keeping fit. Some people get motivated by having a group of people in an organization having to follow rules and regulations rather than exercising alone (Too, 2011). Exercising  and keeping fit does not only improve and maintain fitness level but it can have a huge impact on living longer even not losing weight (Gard ner, 2011). Besides that, GetFitCrossFit promotes its organization really well. For every first Tuesday and Wednesday of the month, eligible students and unemployed may attend their sessions for free (GetFitCrossFit, 2010). The Social Medias such as Facebook, Twitter, Ranoadidas and Bruneitweet plays a big role in advertising their organization (Sheridan, 2012). Even the bruneitweet, Delwin Keasberry, is a member of this organization. Current members share their e xperiences and goals with their colleagues at work, school and their social peers which really motivate them and hence joining this organization. GetFitCrossFit are also known through the newspapers as they help for charities. They also hold motivational talks to different institutions and participate in road shows. In conclusion, exercise and fitness are necessary elements in order to lead a healthy lifestyle. It is definitely clear that in order to live long, one needs to have a healthy life. Although Brunei is trying their best to promote and campaign for healthy lifestyles, the issues as mentioned above may arise. GetFitCrossFit organization has a very good intention, motivation and role but it really depends on how effective the organization is. Advertisement and promotion is really important to show adults in Brunei what GetFitCrossFit clearly does and their aim. To wrap it all up Benjamin Franklin once said that â€Å"An ounce of prevention is worth a pound of cure.† (

Temperature Dependent Speed Controller Using Thermistor Computer Science Essay

Temperature Dependent Speed Controller Using Thermistor Computer Science Essay This project is a standalone automatic fan speed controller that controls the speed of an electric fan according to our requirement. This closed loop feedback control system is efficient and reliable by using embedded technology . Micro controller (AT89C51) allows dynamic and faster control. Liquid crystal display (LCD) makes the system user-friendly. The sensed temperature and fan speed level values are simultaneously displayed on the LCD panel. It is very compact using few components and can be implemented for several applications including air-conditioners, water-heaters, snow meltars, ovens, heat-exchangers, mixers, furnaces, incubators, thermal baths and veterinary operating tables. AT89C51 micro controller is the heart of the circuit as it controls all the functions. The temperature sensor thermistor senses the temperature and converts it into an electrical (analog) signal, which is applied to the micro controller through ADC. The analog signal is converted into digital format by the analog to-digital converter (ADC). The sensed and set values of the temperature are displayed on the 162-line LCD. The micro controller drives control relays by means of ULN driver circuit to control the fan speed with the help of high wattage tagged wire wound resistor. Single pole dabble throw (SPDT) relays are connected to the micro controller through a ULN driver circuit. The relays require 12 volts at a current of around 50 mA, which cannot provided by the micro controller. So the ULN driver circuit is added. The relays are used to operate the electrical fan or for operating any other electrical device. Normally the relays remain off. As soon as pin of the micro controller goes high, the relays operate This project uses regulated 5V, 500mA 12V, 500mA power supply. 7805 and 7812 three terminal voltage regulators are used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac out put of secondary of 230/12V step down transformer. This project is useful in process industries for maintenance and controlling temperature. CHOICE OF MICROCONTROLLER There are different types of processors and controllers available in the market. Industrial and control application/may require automation of the process such as temperature, pressure, liquid flow, etc., in order to minimize manual intervention. To automate any application an intelligent controller plays a major role. One such controller proposed for the project is AT89C51, an 8-bit microcontroller. The AT89C51 is a low-power, high-performance CMOS 8-bit microcomputer with 4K bytes of Flash Programmable and Erasable Read Only Memory (PEROM). The device is manufactured using Atmels high density nonvolatile memory technology and is compatible with the industry standard MCS-51à ¢Ã¢â‚¬Å¾Ã‚ ¢ instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a con- ventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C51 is a powerful microcomputer which provides a highly flexible and cost effective solution to many embedded control appli- cations The AT89C51 provides the following standard features: 4Kbytes of Flash, 128 bytes of RAM, 32 I/O lines, two 16-bit timer/counters, a five vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator and clock circuitry.In addition, the AT89C51 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port and interrupt system to continue functioning. The Power-down Mode saves the RAM contents but freezes the oscillator disabling all other chip functions until the next hardware reset. CHOICE OF MEMORY As the system under consideration is using AT89C51 microcontroller it has 4K Bytes of In-System Reprogrammable Flash Memory and EPROM for its purposes. The ATMEL AMR code is stored in an inbuilt flash memory. Flash memory cannot be reprogrammed constantly. The temperature sensor device also supports the storage of last ten pairs of measurements and new measurements are over written to the older one. Hence this system is using EEPROM as a data storage memory. Even though EEPROM is slower than Flash memory it can be rewritten as many number of times as wanted. Memory Organization The information presented in this chapter is collected from the Microcontroller Architectural Overview, AT89C51, AT89LV51, AT89C52, AT89LV52, AT89C2051, and AT89C1051 data sheets of this book. The material has been selected and rearranged to form a quick and convenient reference for the programmers of Atmels microcontroller family of devices. This guide pertains specifically to the AT89C51, AT89LV51, AT89C52, and AT89LV52. Memory Organization Program Memory The AT89C Microcontroller has separate address spaces for program memory and data memory. The program memory can be up to 64 Kbytes long. The lower addresses may reside onchip. Figure 1 shows a map of the AT89C51 program memory, and Figure 2 shows a map of the AT89C52 program memory. The AT89C10512051 do not have off-board memory expansion. Figure 1. AT89C51 Program Memory Flash Microcontroller Memory Organization Figure 2. AT89C52 Program Memory 0498A Data Memory The AT89C can directly address up to 64 Kbytes of data memory external to the chip. The MOVX instruction accesses the external data memory. (Refer to the Instruction Set section in this chapter for a detailed description of instructions). The AT89C51 has 128 bytes of on-chip RAM (256 bytes in the AT89C52) plus a number of Special Function Registers (SFRs). The lower 128 bytes of RAM can be accessed either by direct addressing (MOV data addr) or by indirect addressing (MOV Ri). CHOICE OF ADC ADC0804 (Analog to Digital Converter) Figure 3 illustrates the main function of the ADC0804 i.e. to convert the input signal from temperature sensor device to voltage form that has 8-bit output. This device acts as a memory location or port entry to the microprocessor and does not require additional logic extension. ADC0804 design. To prove that this design is according to the specifications hardware, the formula used is as follows: ADC out = Ain / Vmax X 256 (1.2) where ADC out = digital output value Ain = Input Gain Vmax = Maximum voltage Using formula (1.2), it is found that: without amplifier, ADC out = Ain / Vmax X 256 = (1/5) X 256 = 51 D = 00110011 B So that, the temperature value is = 100 / 51 = 1.96 °C à ¢Ã¢â‚¬ °Ã¢â‚¬ ¦ 2 °C If using amplifier, ADC out = Ain / Vmax X 256 = (5 /5) X 256 = 256 D = 1111 1111 B (Proved) ADC 0804 Analog to digital converters find huge application as an intermediate device to convert the signals from analog to digital form. These digital signals are used for further processing by the digital processors. Various sensors like temperature, pressure, force etc. convert the physical characteristics into electrical signals that are analog in nature. ADC0804 is a very commonly used 8-bit analog to digital convertor.  It is a single channel IC, i.e., it can take only one analog signal as input. The digital outputs vary from 0 to a maximum of 255. The step size can be adjusted by setting the reference voltage at pin9. When this pin is not connected, the default reference voltage is the operating voltage, i.e., Vcc. The step size at 5V is 19.53mV (5V/255), i.e., for every 19.53mV rise in the analog input, the output varies by 1 unit. To set a particular voltage level as the reference value, this pin is connected to half the voltage. For example, to set a reference of 4V (Vref), pin9 is connected to 2V (Vref/2), thereby reducing the step size to 15.62mV (4V/255).   ADC0804 needs a clock to operate. The time taken to convert the analog value to digital value is dependent on this clock source. An external clock can be given at the Clock IN pin. ADC 0804 also has an inbuilt clock which can be used in absence of external clock. A suitable RC circuit is connected between the Clock IN and Clock R pins to use the internal clock. Pin Diagram:   An ADC is an electronic device that converts continuous signals to discrete digital numbers. The reverse operation is done by a DAC. The digital output may be using different coding schemes such as binary and twos compliment binary. Most ADCs are of a type known as linear which means that the range of input values that map to each output value has a linear relationship with the output value. The ADC used is an IC, ADC 0804. Features  · Compatible with 8080  µP derivatives-no interfacing logic needed access time 135 ns  · Easy interface to all microprocessors, or operates stand alone  · Differential analog voltage inputs  · Logic inputs and outputs meet both MOS and TTL voltage level specifications  · Works with 2.5V (LM336) voltage reference  · On-chip clock generator  · 0V to 5V analog input voltage range with single 5V supply  · No zero adjust required  · 0.3[Prime] standard width 20-pin DIP package  · 20-pin molded chip carrier or small outline package  · Operates ratiometrically or with 5 VDC, 2.5 VDC, or analog span adjusted voltage reference CHOICE OF SCHEDULING ALGORITHM. Many scheduling algorithm have been studied to guarantee the real time constraints of real time process. Scheduling decisions of this algorithm is usually based on parameters which are assumed to be crisp. However, in many circumstances the values of these parameters are vague. The vagueness of parameters suggests us to make the usage of fuzzy logic to decide in what order the request should be executed to better utilize the system and as a results reduce the chance of a request being missed. Our main contribution is proposing a fuzzy approach to microprocessor/microcontroller real time scheduling in which the scheduling parameters are treated as fuzzy variables. SAMPLING RATES OF CONTROLLED LOOP The temperature measurement device Resistance Temperature Detector a measure temperature in the range of -25-150 degree Celsius. But in this application the temperature inside the container is maintained at 25 degree Celsius. There is no much deviation of temperature inside the container. The container temperature doesnt vary that much in a second. The resolution of the device is 0.1 degree Celsius if the temperature inside the container varies more than the 0.1 degree Celsius the temperature sensing device can able to detect and the output will be shown. Suppose the temperature inside the container is changing at the rate of 0.1 degree Celsius per second the output has the frequency of 1 Hz. So the sampling rate for the device to sample or measure the temperature neednt be that high. So the device is using a sampling rate of 1 for measuring temperature i.e. temperature measurement device is having a sampling frequency of 1 HZ. Number of bits per second will be 10 bits per second (1 HZ*10 bits) which can be easily handled by 10 bit ATMEL ADC. Temperature Sensor Resolution   0.1 degree Celsius Temperature change inside the container   1 degree Celsius per minute So the frequency would be 0.6 HZ Sampling frequency = 0.6*5 = 3Hz (to be greater) Sampling rate = 0.3 Seconds   CHOICE OF REAL TIME SCHEDULING ALGORITHM There are basically four types of real times scheduling algorithm Round Robin Round Robin with interrupt Function queue scheduling RTOS( Real Time Operating System)   ROUND ROBIN It is the simplest algorithm. The Round Robin algorithm is characterized by the absence of interrupts. The algorithm consists of a main loop that checks each I/O device in turn and Service them if needed. it cannot suffer from shared data problems. Latency is limited by the maximum duration of a loop cycle. Attractive for simple environments. At the same time the disadvantage for the algorithm is it cannot set priorities. Its worst case wait for an important task code is the sum of execution time of all the other task code. ROUND ROBIN WITH INTERRUPT The main advantage of Round Robin with interrupt routines deals with the very urgent needs of devices. Interrupt routines set flags to indicate the interrupt happened. Main while loop polls the status of the interrupt flags and does any  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   follow up process required by a set flag. It moves more control over priority.    FUNCTION QUEUE SCHEDULING The advantage of function queue scheduling is latency for high priority devices can be reduced compared to Round-Robin with Interrupts. In Round-Robin with Interrupts every loop may end up executing every follow-up task. Function-Queue Scheduling guarantees that at most a single follow-up task is executed per loop iteration. The main disadvantage is latency for low priority tasks can increase. Low priority tasks can actually starve. Queuing algorithm may be complex/costly to run/code. If a low priority follow-up task is very time consuming the latency for higher priority response times will suffer. RTOS The advantage of RTOS is interrupts signal the need for follow-up tasks. But, unlike Function-Queue Scheduling, this is handled by the Real-Time Operating System and not by the interrupt routines manipulating flags or a queue. Instead of a loop deciding what to do next the RTOS decides. One follow-up task can be suspended by the RTOS in favouring of performing a higher priority task.-Queue. Suspension of tasks allows the worst case wait for the highest priority item to be zero. Built-in scheduling mechanism yields a system with very stable response characteristics even when changes to the code occur. Widely available for purchase. This embedded system is using  Round Robin Scheduling  as real time scheduling algorithm. The device is used to control only the temperature inside the steel container and so round robin architecture can be set here. FAILURE CONDITIONS The system will fail only if the temperature exceeds the range of the temperature sensor. Since it is a room temperature controller the variation in the room is very slow. PERFORMANCE MEASURES As the performance measure of system is totally dependent on PID Controller performance. So the PID controller performance can be evaluated by the periodic of the parameter hereafter against some baseline values. The performance improvement actions are taken accordingly on a periodic manner. So the Process Variable Error Overshoot Steady state error Settling time Must be calculated by different values of PID controllers Controller tuning methods provide the controller parameters in the form of formula or algorithms. They ensure that the obtained control system would be stable and would meet. These methods require certain knowledge about the controlled process. This knowledge, which depends on the applied method, usually translates into a transfer function. The objectives which should be achieved by the application of the control system are associated with the   control system features Regulating performance, Tracking performance, Robustness, noise attenuation.

Free College Essays - New Journalism and The Right Stuff :: The Right Stuff

The Right Stuff - New Journalism The Right Stuff is a great example of the writing style called "New Journalism". Author Tom Wolfe is widely known as a ground breaker in this type of writing. New Journalism has its foundation in fact but uses techniques from the world of fiction to present the information in a refreshingly realistic way. One important fictional technique is dialogue. Seldom in "normal" journalism does a reader come across real dialogue. Through dialogue, an author is able to show the characters' personalities. The reader's ability to hear what a character says is as important as the ability to see how he reacts. For example, when Wolfe shows us Chuck Yeager's last try at a record, the dialogue gives the reader an extra sense into the intensity of the moment. A second important technique taken from fiction is scene-by-scene examination. Traditionally, journalists present news by importance of the events in a story. In New Journalism, the author instead describes only a certain number of important events. The different scenes are used in the same way that a writer of fiction builds the plot of the story as a whole. In an essay on "New Journalism", Chris Anderson states that a "New Journalistic" "writer can not only render the full details of a scene or event but also describe the subjective, emotional life of the characters" (Marowski and Matuz 418). A third fictional tool is descriptive language. In The Right Stuff, for example, Wolfe purposefully uses the insider slang of fighter pilots. Critic Chris Anderson says he is "fascinated with the insider's slang, the power words of the privileged groups and underground cultures he seeks out" (Marowski and Matuz 418). This use of words from a small, elite in-group helps to allow the reader to understand that group's characteristics, thoughts, and emotions. A fourth technique is point of view. Most journalists are taught to keep their own perspective out of the story and never use the first person in writing. "New Journalistic" novels like The Right Stuff balk at this idea. Wolfe's first-person point of view puts a human face on the news.

One Hundred Years Of Solitude :: essays research papers

One of the stated aims of Mà ¡rquez, as he said it, was to “tell a story just like my grandmother would have done it';. With the result in hand the conclusion must be that he has done it quite well. Mà ¡rquez has managed to capture the vivid language of story telling as well as having the story moving both " forward and sideways". Togheter with the extensive use of magic realism and the life of mankind portrayed in the village I ´m quite sure that it will take me many years before I even start forgetting the book. In the beginning of the book the reader is directly thrown into action with Colonel Aureliano facing the firing squad. With his thoughts we are taken several years back in time when Macao was a village of twenty adobe houses. This, the beginning of the town, could in a different light be seen as representing the begining of mankind , “clear water that ran along a bed of polished stones, which were white and enormous, like prehistoric eggs.' ;. As the story goes on the town moves from utter igorance “ the world was so recent that many things lacked names'; and developes until we are in the modern time with the banana company, telephones and the union until it, towards the end of the book due to heavy rainfall, turns into an uncivilized town again before it ´s destroyed in a heavy storm. The cycle of the town starts and ends on the same point just as the development of the family and all actions, they all turn in cycles just as Ùrsula thanks to her old age found out. The way in which the story is written, with magic realism and the story evolving both forwards and sideways is one of the more unusual characteristics when, as a european, reading the book. The story gives the impression of moving sideways as the same incidents are retold from the view of different persons which means that events are put in a different order compared to other novels “Melquà ­ades had not put events in the order of man ´s conventional time, but had concentrated a century of daily episodes in such a way that they coexisted in one instant';. Magic realism, another specific South American characteristic, adds to the feeling of the narrator really just copying an old oral story. “ the boy brought him a cup of thick and steaming chocolate, which he drank without pausing to breath.

Negative Peer Pressure Essay -- Peer Pressure Speech

Go on." "Everybody's doing it." "It's only one drink." "You're such a loser." I didn't know what to do. All these voices were repeating themselves over and over in my head. I didn't want to give into them because I knew what I was doing was wrong. I didn't want everyone to think I was scared but what if my parents found out. Why was I here? Are these people really my friends if they are really doing this to me? These were the vital questions that I didn't know the answers to. I knew in my heart it was wrong but I gave in. This is usually the typical outcome of a scene like this. It is called peer pressure. It can be disguised in many different forms. In this essay I am going to look at different ways in which teenagers can be influenced by peer pressure. Many teenagers experiment with cigarettes, drugs or alcohol. It is likely that they take their first cigarette, drink or drug because of pressure from peers or friends. The influence of friends who smoke is the main reason teenagers start, although you are also more likely to start if your parents do. Cigarettes, like alcohol, are an acquired taste but over eight per cent of people who smoke in their teens become permanently hooked. Often adolescents drink to feel less uncomfortable and more relaxed with friends and peers and because they are encouraged to do so by other teenagers. Regular excessive drinking can lead to poor school work, social and emotional problems, the use of other drugs and sometimes even suicide, The main difference between alcohol or cigarettes and other drugs is that once you are over a certain age you can legally buy alcohol and cigarett... ...y develop other symptoms such as headaches or stomachaches. Some sufferers feel short of energy and want to sleep all the time; others will have difficulty in sleeping and become very tired. Tiredness, lack of interest and difficulty in concentrating can affect schoolwork. Depressed people often lose interest in hobbies and activities and feel cut off from the people around them. They feel worthless and believe they have no power to change the situation they are in. some young people turn to drug or alcohol abuse, sleeping around, crime, skipping school or running away from home. These can all be ways of distracting themselves from their feelings. Depression has to be taken seriously and sufferers need to seek immediate help. Counselling, psychotherapy or sometimes medication can make recovery quicker and easier.

Coca Cola in India: Business Communications

Sanjiv Gupta, President and CEO of Coca Cola in India, is facing a crisis concerning pesticide levels in coke in the country of India. The Center for Science and Environment (CSE), an activist group in India focused on environmental sustainability issues issued a press release stating: â€Å"12 major cold drink brands sold in and around Delhi contain a deadly cocktail of pesticide residues† (Argenti, p. 284). Recommendations for Coke’s communications strategies include accepting and adhering to higher standards of social responsibility in India and forming an alliance with the government to set these higher safer standards.Coca Cola should choose to emerge and set itself apart from its biggest competitor, Pepsi, by accepting a more socially responsible. In order to accomplish this, Coke can align itself with the CSE goals for an environmentally safe and industrialized India. Coke should recognize the enormous reputational benefits that could come from such a partnership in correcting the pollution problem in India. Taking on social responsibilities has a number of positive outcomes for corporate leaders.Once the world community learns of Coke’s environmentally responsible goal in India, the company will project a positive interest in India and to the rest of the world (Argenti, p. 65 ). The people of India have shown that they want a company that is concerned about their health, welfare, and environment as â€Å"sales down over 30-40%1 in only two weeks on the heels of a 75% five-year growth trajectory and 25-30%2 year-to-date growth† (Argenti, p. 285 ) A positive reputation can help companies weather crises more effective (Argenti, p. 91) The next step would be for Coke to enhance its relationship with the government.Companies have begun to realize that instead of fighting regulation, it should advocate its position to political decision makers (Argenti, p. 238). Businesses use a number of tactics to further the position of their bu siness with the influential group of economic decision makers (Adams & Brock, 1986). With the influence in the government, Coke can be involved with the developing of the new standards the government has demanded. Strong government relations are important in India (in any country) and will provide an opportunity to communicate all the benefits and investments Coke has provided to the economy in India including almost 7000 jobs.By working with the government to set standards and clean up pollution, Coke will have influence of the government. Influence over the government has proven to be a benefit for business (Irin, 2010). When business has an â€Å"influence in government, unless you’re right there to limit it, it can intrude in just about any industry,† In conclusion, leaders of successful organizations with a consistent in their message and image has ensured everyone involved of an initiative or change, what it is intended to achieve, as well as the route that will be taken is going to continue to be successful (Clutterbuck 2001).A company with an international image and reputation is going to weather this crisis. They can also take a socially responsible approach, and lead change in India. This will distinguish the corporation from its competitors, and as Proverbs tells us, â€Å"defend the rights of the poor and needy† (Proverbs 31:9). A constituent is someone who is on the receiving end of a message, in the words of Aristotle â€Å"person †¦ to whom the end or object of the speech refers† (1975). The key constituents are those that are receiving the message of the communication.In this case, the constituency would be the government of India and the Coke-drinking public, particularly those in India. The message will be sent out all over the world that Coca Cola aided in the environment of India. With use of the internet, messages of companies reach the far corners of the world within a matter of minutes (Argenti, p. 172). Biblical Integration: God wants us to help our fellow brother, not to ignore them. The Bible tells us â€Å"Defend the cause of the weak and fatherless; maintain the rights of the poor and oppressed. Rescue the weak and needy; deliver them from the hand of the wicked. † Psalm 82:3-4

Effect Of Violence On Children’s Television Programs

The last decade has generated enormous momentum regarding the effect of violence in media targeted at individuals in the young age bracket. But even as awareness increases the problem seems to increase in magnitude. Experts argue that unless the demand does not reduce the supply will not match down and this might just be true. In reality the stem of the problem is still lack of awareness. An average educated American family might know not to expose their children to violence on television but may not really gauge the fact that the program their toddler watches on screen has its share of violence in a well fed and nourished capsule. This is largely the problem. Of course, other social factors can increase the likelihood of violence by youth: lack of interaction with parents, brutality in home life, exposure to violence in neighborhoods, and easy access to guns. Here we are talking about an entire generation of our children who shall be victims to aggression and violence and who shall with increased likelihood grow up to be less productive individuals. Let us not forget that we are talking about the future of any given nation when we speak of its children. Take a look. Significance of the problem at hand: So just why is it so important that we try to understand something that happens in childhood? And that too something as trivial as a few stunts in your child’s daily program, some might ask. Don’t most children grow out of such things when they grow up and begin to exhibit normal acceptable adult behavior? The truth is that during early childhood, the foundation is laid for future social, emotional, cognitive, and physical development. During this formative period, young children are particularly vulnerable to negative influences. In most instances, children have no control over the environmental messages they receive. Up until age seven or eight, children have great difficulty distinguishing fantasy from reality, and their ability to comprehend nuances of behavior, motivation, or moral complexity is limited. This special vulnerability of children necessitates increased vigilance to protect them from potentially negative influences. EFFECTS OF VIEWING VIOLENCE. The nation's first major study on the effects of TV violence was a 1972 U.S. surgeon general's report that confirmed that televised violence, indeed, does have an adverse effect on certain members of our society. MAJOR and Direct -Children may become less sensitive to the pain and suffering of others (‘desensitization’ to violence) -Children become fearful of the world around them -Children may be more likely to behave in aggressive or harmful ways toward others –Media violence can be especially damaging to children under age 8 and their families because they cannot readily tell the difference between real life and fantasy and stresses the caregivers. -Direct anti social behavior as a result of simulating the acts seen on television. -Immediate phobias due to what is seen on screen which makes them fearful   of the world around them. – In their play, children imitate those characters reinforced for their aggressive behavior and rehearse the characters' scripts without creative or reflective thought. And it has to be well understood that creativity and reflective thought are part of the criteria for assessment of children in school as part of their national curriculum and these provide them chances to score higher. Thus there are chances that the childs school results drop. MINOR and Indirect -Children who watch a lot of TV are less aroused by violent scenes than are those who only watch a little; in other words, they're less bothered by violence in general, and less likely to do anything wrong with it. One example: in several studies, those who watched a violent program instead of a nonviolent one were slower to intervene or to call for help when, a little later, they saw younger children fighting or playing destructively. -More likely to think that the world is a mean and dangerous place( feelings of phobia and discontent which are generally unusual at an early age) – ‘Children who watch the violent shows, even ‘just funny' cartoons, were more likely to hit out at their playmates, argue, disobey class rules, leave tasks unfinished, and were less willing to wait for things than those who watched the nonviolent programs,' says Aletha Huston, Ph.D., now at the University of Kansas. -Research also indicates that TV consistently reinforces gender-role and racial stereotypes. -Children will view violence as an acceptable way to settle conflicts – Research has shown that children who consistently spend more than 4 hours per day watching TV are more likely to be overweight. -Young individuals become comfortable with physical aggression and even arousing them to violent action, it can make others increasingly fearful of being victims. -Lack of interaction with family members or peers who in turn would provide mediating influences in the child’s development. – Direct antisocial behavior in children which indirectly causes violent and criminal behavior when older. – Children may become less sensitive to the pain and suffering of others – Long term Exposure to media violence leads children to see violence as a normal response to stress and as an acceptable means for resolving conflict in the years to come and this behavior it is reported can continue into adulthood. – In these situations. children's creative and imaginative play is undermined, thus robbing children of the benefits of play for their long term development. Conclusion The prevalence of violence in American society is a complex social problem that will not be easily solved. Violence in the media is only one manifestation of the larger society's fascination with violence. However, media violence is not just a reflection of violent society, it is also a contributor. If our nation wishes to produce future generations of productive adults who reject violence as a means of problem solving, we must reassert the vital role of government in protecting its most vulnerable citizens and, together, work to make media part of the solution. .   

My First Child

I walked through the doors of Moses Taylor hospital, In Scranton, Pennsylvania. I was feeling apprehensive and uneasy, as I found myself at the nurses' station of labor and delivery. Once I was finished with registration, I followed a nurse into the dusty rose and moss green room, where I would be staying until the much anticipated arrival of my child. I tried to keep myself occupied by watching television, reading, and doing crossword puzzles, but nothing could have kept me from feeling the excruciating pain of labor.The eagerness to have this all over and done with, was definitely not helping with the anxiety I was feeling during that process. After 22 grueling and strenuous hours of being stuck In a bed, and three different shifts of nurses, I finally met my daughter. Friday morning, at 4:mama, the sky was dark and cloudy, and the moment I had been anxiously awaiting for nine and a half long months, was here at last. Everyone in the room got very quiet as my child entered the wor ld. I was very confused as to why I had not heard any sounds coming from her and it began to worry me. The moment I heard her cry, I new everything was going to be okay. Oh! She Is absolutely breath-taking,† I exclaimed as Dry. Reedy placed the Innocent child on my chest. Just as I said that, a tiny hand reached up and touched my face. I braced myself against the back of the bed; I could hardly contain my excitement as I held my daughter in my arms for the very first time. I could smell the sweet, inviting aroma and feel the velvety softness of her skin. Nothing in life had prepared me for the overwhelming love I felt at that moment. I looked over at my child's father; while fighting back the Inevitable tears of Joy that ere making their way Into my eyes, and I stated. Frank, look at how perfect she SSL Look at her tiny little nose. † I can still remember the first time I set eyes on her. She was naked, and glistening with the slimy waters of birth. As the nurse removed her from my arms, to clean and weigh her, I could not take my eyes off my little miracle. The instant I saw her, I knew the name we had chosen would fit her beautifully. The nurse, wearing arctic white Nikkei sneakers and soft pink scrubs with a cute little Winnie the Pooh pattern on them, handed my daughter back to me. She was wrapped In an Ivory blanket, with baby blue and cherry red Infant foot prints on It.Nurse Lori began filling out my child's vital statistics, â€Å"She is seven pounds and fifteen ounces and 20 inches long. Have you decided on a name for her yet? † â€Å"Aubrey. † I answered. â€Å"Aubrey Grace. † Lori commented, â€Å"What a great name for such a beautiful child. Congratulations! † â€Å"Thank you,† I replied. The next few hours were filled with visitors coming to welcome Aubrey Into the world. Aubrey met her aunts, uncles, grandparents, and Godparents all in the course of a day. Aubrey started getting over-whelmed with all of the commotion around her. WA! † cried Aubrey, as she let out this tiny little cry. I tried to console her as best as I could, and eventually found that she was hungry. I quickly grabbed the bottle of Gerber formula for her. As I held my tiny bundle of Joy in my arms, I could see a lonesome tear run down my mother's cheek. When I knew exactly why my mother was crying. They were not tears filled with sadness, but were tears of Joy. My mother helped me through so much in my life, and I never understood the love she had for me until I finally had a child of my own.

Advantages for sociologists in using structured interviews Essay

The structured interview, also known as the formal or questionnaire interview, involves a face-to-face or alternatively an over-the-phone delivery of a questionnaire. Structured interviews use a pre-set list of questions designed by the researcher and asked to all interviewees in the same way, this is know as an interview schedule. Interviewees then choose from a list of set answers, allowing structured interviews to be relatively quick. Structured interviews have various advantages, therefore, some sociologists, mainly Positivist sociologists, choose to use structured interviews when conducting research. Positivists go by the assumption that there is a measurable objective social reality. They take a scientific approach using methods such as structured interviews to obtain quantitative data. Positivists are mainly interested in research methods that achieve their main goals of reliability, generalisability and representativeness, for this reason, they favour structured interviews as they achieve these goals. This is because structured interviews have close-ended questions and answers that are standardised, counted and quantified; they are reliable because they can be therefore replicated. Positivist sociologists also prefer to use structured interviews when conducting research because the pre-coded responses mean that produce quantitative data, can allow cause-and-effect relationships can be established. Thus, structured interviews are preferred by positivists. Also, structured interviews are representative and can therefore be generalised, because of the fact that they are often large-scale. There are also practical advantages to using structured interviews. For an example, training interviewers is relatively easy and inexpensive as no specialist skills have to be taught as the questions tend to be very straightforward as they often close-ended, and do not require too much thought. Due to the fact that skills taught are minimal, the process of training interviewers will not cost too much. This brings a huge practical advantage for sociologists of structured interviews being low cost. Another practical advantage is that structured interviews are relatively cheap, quick and easy to administer. This enables sociologists to use a  larger sample in the interview process, allowing more representative results to be produced. Therefore, the researcher can make generalisations. No only this, but structured interviews have a higher response rate, than mailed questionnaires for example, further improving and reinforcing the representative advantage of structured interviews. Furthermore, face to face interviews ensure a much higher response rate than mailed questionnaires for example, due to the fact that the researcher’s presence means that the research purpose and importance can be explained to potential interviewees, allowing them to understand how valuable it is that their response is correct and true, thus increasing validity- an important advantage for sociologists. Finally interviewer effect occurs when the interviewer’s presence affects the interviewee’s responses, in turn reducing validity. However, the advantage with structured interviews is that the interviewer effect with be much less than with unstructured, open-ended unstructured interviews. This is due to the fact that in structured interviews contact is restricted to asking and responding fixed list of questions and close-ended answers. All points considered there are a number of advantages for sociologists in using structured interviews in their research. However, in saying this, it can also be argued that there are a also number of disadvantages. For example, it can be said that there is a lack of validity as the researcher decides the questions in advance, a lack of reliability as interviewer effect may influence answers, a cost issue due to training and ignorance towards sensitive issues as deadpan manner may be quite off-putting and there is a lack of rapport. In my opinion, it all depends on whether you are a positivist or an interpretivist. Yes, there are some disadvantages, but I believe that these disadvantages are extremely outweighed by number of advantages that exist for sociologists in using structured interviews in their research.

Chinese Brushwork in Calligraphy and Painting Essay

Chinese Brushwork in Calligraphy and Painting - Essay Example The essay "Chinese Brushwork in Calligraphy and Painting" explores the history and development of Chinese Brushwork in Calligraphy and Painting. The term calligraphy, in an approving way, illustrates the Chinese use of line of painting. Brushwork can be described as an indispensable characteristic of Chinese painting. Brushwork and ink provide the basis for Chinese pictures even with employment of color. Chinese art Cognoscenti recognize the character of a line the moment they cite a painting. Chinese writing and painting developed simultaneously sharing the same techniques and tools. Some types of brushes able to create rhythmically diminishing and swelling lines developed between 4500 and 2000 BC embellished linear patterns on pottery jars. Block-like symbols characterize Chinese writing. These bock-like symbols stand for ideas. These symbols are referred to as the characters which evolved from pictograms. The ancient painters and calligraphers regularized the symbols where they de signed each one the symbols to conform to an imaginary square, whether composed of one or 64 strokes. The ancient Chinese calligraphers and painters drew the strokes in regard to a character in a certain order. Calligraphy developed swiftly yielding numerous classes of script. Regular and clerical scripts consist of short, detached strokes easily written with a brush. As the delight of writing took charge, calligraphers devised more techniques, as well as the cursive and running scripts where the calligraphers joined. character’s lines and dots they wrote independently in formal styles (Fazzioli, 1986, p. 35). The earliest form of Chinese writings was the oracle bones referred to as chia-ku-we. These writings were mainly used for sacred functions e.g. connecting with the gods. Chia-ku-we was an oracle-bone with inscriptions on tortoise shells and animal bones (Kwo, 1990, p. 61-63). Chuan-shu, a seal script, characterized the Second evolution of Chinese calligraphy. This form of writing emanated from oracle-bone script. The script was compatible other plans that calligraphers used previously (Kwo, 1990, p. 60). Another change was made to design an aspect that came up with clerical script, known as li shu. Calligraphers and painters wrote the design on silk and paper (Fazzioli, 1986, p. 67). This allowed additional fluid strokes. This is unlike previous cast of iron. The breakthrough of coming up with clerical script, which used brushes and ink marked the starting of calligraphy as a mode of expressing through art. The discovery of clerical script did not mark the end of calligraphy development, but it opened up chances for more improvements. Some of the later designed that improved the calligraphy writings include cursive script, standard script, and running a script (Kwo, 1990, p. 66). Cursive script started as a shorthand technique used in writing personal letters and notes inclusive of the writer and close friends. Invention of this script took place in the early second century B.C.E. Since cursive script allowed for more personalization, it became a channel for â€Å"individual expression that sometimes transcended the contents of the texts†. Creation of Kai-shu happened in efforts to improve the clerical script. It started from the Han Dynasty. Calligraphy gurus of Tang reign altered the previous script from the six reigns and created a â€Å"bold yet elegant standard-type script† (Nakata, 1982, p. 25) that balanced composition of character with brush movement. A simplified version and a freehand method of standard script were referred to as the running script

Caveman Project Research Paper Example | Topics and Well Written Essays - 1000 words

Caveman Project - Research Paper Example These materials might involve stones, wood, or materials for basket weaving. As these materials exist in the wild as raw and not broken down to manageable portions, the individual must then transport them home so that they can be broken down and converted into useable tools and devices for production. For instance, if one is attempting to make a spear they must first ensure that the stone they procured from the journey was grinded down to a level where it could be attached to the spear. During this process if the stone is chipped or broken to a too large extent, then the entire process of gaining the materials must be accomplished again. In terms of fashioning the spear, one must also attend to the wood part. Rather than simply buying wood from a store, the individual must find a tree or sticks that have been discarded. This is a harder task that might be originally assumed as the wood must be of considerable strength and be able to withstand the blunt force pressure of hunting. In t he process of combining the spear and the stone arrow they must be done so with incredible delicacy as a mistake in this department will surely cause the entire process to be have to gone through again. It’s worth noting in these regards that one must recognize the artistry and skill of the cavemen, as it takes more than brute force and knowledge to construct such weaponry. While cavemen are generally thought of as brutes, it’s clear that in order to find subsistence and survival they must also have a variety of subtle and fine-tuned skills. One of these skills one can consider is the nature of basket weaving. Baskets were a central aspect of... While cavemen are generally thought of as brutes, it’s clear that in order to find subsistence and survival they must also have a variety of subtle and fine-tuned skills. One of these skills one can consider is the nature of basket weaving. Baskets were a central aspect of pre-historic life, as they allowed individuals to transport foodstuffs and materials from one region to another. StillÐ ± the actual production of these objects was one of great challenge and skill. As elucidated above, individuals must first collect the materials to construct these objects, which is a laborious process unto itself. In terms of the basket-weaving the proper palm-fronds must be gathered and then taken back to the village or area of gathering. At this point, the caveman must go through an elaborate process of construction where they are interweaved within each other to form a structural whole. While this occurred four thousand years ago, one recognizes that the skills involved in this process are advanced to the point that most individuals today would be at a loss for the means by which they are accomplished.